Hall linear position switch
A Hall cell is used to sense the magnetic fi eld created bya magnet fi xed to the moving part. The magnetic fi eld
strength depends on the linear position of the magnet.
The switch produces a binary output signal depending on
whether the magnetic fi eld strength exceeds a threshold
or not.
Electricfil solution - ready technologies
Characteristics
- Temperatures up to 150°C
- Typical accuracy: ± 0.7 mm
- Response time: 1 ms
- Airgap up to 2.0 mm
- Very small size
- Integrated diagnostics
Electricfil knowhow
- Suitable for integration in sensor clusters or mechatronic modules
- Wide range of packages and interfaces
Application domains
Transmission
Clutch control and
driver assistance
Vehicle dynamics
Clutch, brake, accelerator pedal
Par domaine
Par application
- LVDT
- Hall position sensor
- Eddy-current position sensor
- Hall position switch
- VR speed/position sensor
- Active Hall-GMR sensor
- Oil temperature
- Multi-sensor modules
- Ignition wire set
- Integrated ignition units
- Integrated ignit.coil & wire set
- Pencil coils
- Eddy-current speed sensor
- Smart battery sensor
- Hall current sensor
- Temperature sensor
- Active speed/position sensor
- Active speed/pos./direction
- Magnetic ring system
- Magnetic ring module
Contactez nos équipes
- En Europe
- En Amérique
- En Asie et Océanie
- En Europe
- En Amérique
- En Asie et Océanie