Oil temperature sensor
An NTC thermistor is used to measure the oil temperature.
A thermistor is a resistor used to measure a change in
temperature via the related change in resistance. For an
NTC (negative temperature coeffi cient) thermistor, the
resistance decreases with increasing temperature. A power supply is required, usually 5 volts fed through a load resistance to limit the current inside the sensor to 1 mA. PT100 or PT1000 sensors are also available to provide a faster response and higher resolution and accuracy.
Electricfil solution - ready technologies
Characteristics
- Temperatures -40°C to +180°C
- High accuracy (±1°C at 110°C)
- Optimized response time
- Current draw < 1 mA
- Interface: 2-wire, PWM or analog output
Electricfil knowhow
- Custom solutions for outstanding performance
- Integrated electronic functions including signal processing
- Compatibility with severe immersion tests
- More than 15 years of experience to meet all special needs
- Integration of temperature and speed measurements in a single sensor
Par domaine
Par application
- LVDT
- Hall position sensor
- Eddy-current position sensor
- Hall position switch
- VR speed/position sensor
- Active Hall-GMR sensor
- Oil temperature
- Multi-sensor modules
- Ignition wire set
- Integrated ignition units
- Integrated ignit.coil & wire set
- Pencil coils
- Eddy-current speed sensor
- Smart battery sensor
- Hall current sensor
- Temperature sensor
- Active speed/position sensor
- Active speed/pos./direction
- Magnetic ring system
- Magnetic ring module
Contactez nos équipes
- En Europe
- En Amérique
- En Asie et Océanie
- En Europe
- En Amérique
- En Asie et Océanie